Domestic wind kit 24 V 1500 W with regulator and 4 m mast

This 24 V domestic wind turbine kit with 1,500 W and 3 blades, supplied with its regulator and 4-meter mast, allows for the production and storage of electricity in a compatible battery bank (not provided). Designed for off-grid applications, it contributes to powering your equipment without connection to the electrical grid: cabin, bungalow, autonomous housing, telecommunication site, or pumping system. The available energy depends on wind conditions, battery capacity, and your consumption.

Designed for off-grid installation, this kit combines a three-blade wind turbine with 1,500 W nominal power, an external regulator, and a 4 m stainless steel mast. It allows charging a compatible 24 V battery bank to store the electricity produced by the wind. Batteries and the converter for 230 V devices are to be provided separately.

• A production base for isolated sites, intended for recharging a 24 V battery bank.
• Charge management is ensured by an external microprocessor regulator provided with the kit.
• The mast is assembled by screwing four sections together, without welding operations.
• The mast height can be adjusted from 4 to 6 m with additional elements.

• Nominal power of the wind turbine: 1,500 W
• Maximum power of the wind turbine: 1,600 W
• System voltage: 24 V
• Rotor diameter: 2.10 m
• Number of blades: 3
• Frame material: Aluminum alloy
• Starting wind speed: 2.0 m/s, or 7.2 km/h
• Regulator technology: External microprocessor regulator
• Type of wind turbine intended for the regulator: Three-phase
• Regulator braking voltage: 30 V
• Nominal wind power of the regulator: 1,500 W
• Maximum wind power of the regulator: 1,500 W
• Maximum charge current of the regulator: 65 A
• Maximum discharge current of the regulator: 65 A
• Admissible ambient temperature of the regulator: −35 °C to +75 °C
• Regulator dimensions: 150 × 130 × 50 mm
• Regulator Protection Index: IP67
• Mast Material: Stainless Steel
• Provided Mast Height: 4 m
• Mast Assembly: 4 sections of 1 m, screwable without welding
• Mast Height with Extension: Up to 6 m with additional elements
• Mast Outer Diameter: 60 mm

Prepare an off-grid power supply

This kit is intended for projects not connected to the electrical grid. It can contribute to powering an isolated dwelling, telecommunication equipment, or a pumping installation, depending on the available wind and needs.

The storage relies on a 24 V battery bank compatible with the regulator. To use 230 V AC devices, the installation must be completed with a suitable standalone 24 V / 230 V converter connected to the batteries.

Size the project based on the available wind

The wind turbine has three blades and a rotor with a diameter of 2.10 m. Its nominal power is 1,500 W; this value does not correspond to constant production during use.

The rotation starts at a wind speed of 2.0 m/s, without reaching the nominal power. The location, obstacles, turbulence, and mast height influence production; autonomy also depends on storage and consumption.

Integrate the regulator into the charging chain

The external microprocessor regulator manages the charging of 24 V batteries from a three-phase wind turbine. Its features include a braking threshold of 30 V and a maximum charging current of 65 A.

The electricity produced passes through the regulator before being stored in the batteries. These ensure the energy reserve and buffering role: direct connection of the wind turbine to devices or the converter is to be avoided.

Organize the mast assembly

The stainless steel mast reaches 4 m with its four 1 m sections assembled by screwing. Additional elements allow an extension up to 6 m; they are a separate option from the provided height.

The kit includes the mast base, a support for three guy wires, and the guying cables. Ground fixings need to be planned, with anchoring and guying adapted to the terrain and the installation's exposure.

Composition and accessories

Included

• 1 × Three-blade wind turbine, 24 V, 1,500 W
• 1 × External microprocessor controller, 24 V, 1,500 W
• 1 × 4 m stainless steel mast
• 1 × Mast base
• 1 × Mounting bracket for three slings
• 1 × Guy wires

Optional

• 1 × Additional elements to extend the mast up to 6 m

Not included

• 1 × Storage batteries
• 1 × Standalone converter 24 V / 230 V
• 1 × Ground anchoring fixtures, including dowels

Compatible with

• Off-grid installations using a 24 V battery bank compatible with the controller's charging parameters.
• Powering devices with 230 V AC through a suitable standalone converter 24 V / 230 V connected to the batteries.

Compatibility limits

• The start at 2.0 m/s corresponds to rotation initiation, not to achieving the rated power.
• Production depends on wind conditions and location; a power of 1,500 W is not constantly available.
• Autonomy depends jointly on actual production, storage capacity, and device consumption.

Precautions

• Do not connect the wind turbine directly to devices or the converter. Use the controller and battery bank designed for this configuration.
• Adapt anchoring and guying to the terrain characteristics and site exposure.
• Choose batteries whose characteristics are compatible with the controller's charging parameters.

Can I power my devices directly with 230 V?

No. The production must go through the regulator and a 24 V battery bank. A suitable standalone 24 V / 230 V converter, connected to the batteries, is necessary for devices using 230 V AC.

What additional elements should I plan for with the kit?

The batteries and ground anchoring fixings are not included. The standalone 24 V / 230 V converter should also be planned separately if you wish to power devices with 230 V.

Does the wind turbine produce 1,500 W at 2.0 m/s wind speed?

No. The speed of 2.0 m/s corresponds to the start of rotation. It does not correspond to reaching the nominal 1,500 W, and production varies with wind and installation conditions.

How is the mast assembled and can it be extended?

The supplied mast is 4 m and consists of four 1 m sections that screw together, without welding. Additional elements allow its height to be extended up to 6 m.

Is this kit suitable for an isolated cabin?

It can help power an off-grid cabin. The sizing must consider the available wind, electrical needs, and the capacity of the compatible 24 V battery bank.

2-year warranty

15926 - 261020261229