Hybrid Inverter 5000 VA / 5000 W – 48 V • Pure Sine + MPPT 80 A (UPS, Wi-Fi) • Off-grid system
SKU: 15782
Livraison: 6 à 10 jours
- Secure payment
- 14-day returns
- Tracked shipping
All-in-one solution for standalone or hybrid installations: 230 V inverter, 80 A MPPT solar controller, and integrated grid charging. Ensures stable power supply for sensitive devices (computers, appliances, pumps, etc.) and automatic UPS switching grid ⇄ battery. Wi-Fi module included for remote monitoring.
Key features
- 3-in-1: 230 V inverter, 80 A MPPT, grid/generator charger.
- Continuous power: 5000 W • Peak: 10,000 W (motor/compressor starts).
- Pure sine: compatible with sensitive devices (PC, fridge, AC*).
- Wide PV range: 120–500 V DC (optimal MPPT: 120–450 V DC), up to 4400 W PV.
- Efficiency > 95% (typical) to maximize usable energy.
- Wi-Fi: real-time system status (voltages, charge, alerts).
- Complete protections: short circuit, over/under voltage, overload, reversal.
*According to the device's rated power and starting current.
What is it for?
To ensure reliable power supply in isolated locations (house/cabin/lodge), protect your equipment during grid outages (UPS mode), and get the most out of your solar panels with the integrated MPPT.
Modes & functions
- Charging modes (4): solar priority; grid priority; solar+grid mix; solar only.
- Output modes (3): solar priority; grid priority; inverter priority.
- UPS: automatic switching for power continuity.
- Battery management: bulk & float phases according to chemistry.
Technical specifications
Photovoltaic input
- Accepted PV voltage range: 120–500 V DC
- MPPT tracking range: 120–450 V DC
- PV charging current: 0–80 A
- Maximum PV power: 4400 W
Inverter (AC output)
- Waveform: pure sine wave
- Continuous power: 5000 W
- Peak power (surge): 10,000 W
- Output voltage: 220–230 V AC
- Frequency: 50/60 Hz (automatic detection/management)
- Efficiency: > 95% (typical)
Battery
- Nominal pack voltage: 48 V (required for operation)
- Battery voltage range: 40–60 V DC
- Compatible types: Lead (AGM, GEL, flooded) & Lithium (LiFePO4, NCM)
Mains / generator input
- Input voltage: 170–280 V AC ±2%
- Frequency: 50/60 Hz (automatic detection)
Protections & safety
- Protections: short circuit, overvoltage / undervoltage, overload, reverse polarity
- Charge management: bulk & float, adjustable profiles according to chemistry
Battery compatibility
Suitable for 48 V Lead (AGM, GEL, flooded) and Lithium (LiFePO4, NCM) batteries. Set charging voltages according to battery manufacturer's recommendations (BMS required for lithium).
Schematic diagram
PV 120–500 V DC → MPPT 80 A → Battery 48 V (mandatory) → Output 220/230 V AC to the installation. Grid/generator input 170–280 V, 50/60 Hz possible for charging/backup.
Package contents
- 1 × Hybrid inverter 5000 W – 48 V
- 1 × Wi-Fi Module (remote monitoring)
- 1 × User manual
Important notes
- 48 V Battery mandatory: the device will not start without a connected pack.
- Respect the PV range 120–500 V DC and the cable section suitable for the currents.
- Do not mix new/old batteries or different technologies in the same pack.
- Install and connect in 230 V AC according to best practices (qualified person recommended).
Application examples
Isolated house/cabin, guesthouse, workshop, office, home servers, pumps, refrigerator, coffee maker, power tools, air conditioning* (*if properly sized).
2-year warranty
L03YTJEUTJ5000WHV-1 / 15782
