Pure Sine Wave Inverter 24V – 3300W continuous - 8000W Max
SKU: 15919
- Secure payment
- 14-day returns
- Tracked shipping
This DC/AC inverter operates from a 24 V battery to provide an alternating output of 220 to 240 V at 50 Hz. It delivers 3,300 W continuously and has a maximum power of 8,000 W. Its pure sine wave output has a total harmonic distortion of less than 3%. A LED display and low battery warning complete its digital control.
- A pure sine wave output with a total harmonic distortion of less than 3% to provide a precise criterion on the waveform supplied.
- Two distinct power levels to compare your needs with the 3,300 W continuous and 8,000 W maximum.
- An LED display to check the operating status, accompanied by a warning when the battery level is low.
- Type of conversion: Direct current to alternating current
- Input battery voltage: 24 V
- Continuous power: 3,300 W
- Maximum power: 8,000 W
- Alternative output voltage: 220 to 240 V
- Output frequency: 50 Hz
- Output waveform: Pure sine wave
- Total harmonic distortion at output: THD < 3%
- Maximum conversion efficiency: Up to 92%
- Output socket type: European
- Control mode: Fully digital
- Operating display: LED
- Battery warning: Low level alert
A conversion suitable for a 24 V power supply
This converter receives direct current from a 24 V battery and transforms it into alternating current. Therefore, the battery voltage is a primary selection criterion for your installation.
The electrical output operates between 220 and 240 V, at a frequency of 50 Hz. The socket type is European: these characteristics allow you to compare the proposed power supply with your devices' requirements.
Distinguish continuous power and maximum power
To select the converter, use its continuous power of 3,300 W as a reference. This value is distinct from the maximum power of 8,000 W and should not be confused with it.
The waveform is another selection criterion: the device delivers a pure sine wave output, with a total harmonic distortion rate of less than 3%. This parameter complements the power specifications.
Check operation and battery level
The LED display allows you to check the operating status of the converter. It is accompanied by a fully digital control that ensures the device's operation.
A dedicated warning signals a low battery level. This indication complements the check of the operating status and draws your attention to the battery powering the converter.
Compatible with
- Powered by a 24 V battery system.
What battery voltage should be used?
This converter is intended for a 24 V battery power supply. It transforms the direct current from this battery into alternating current.
Do the 8,000 W correspond to continuous power?
No. The continuous power is 3,300 W, while the 8,000 W correspond to the converter's maximum power.
What are the characteristics of the electrical output?
The output delivers an alternating voltage of 220 to 240 V at 50 Hz. It is pure sine wave type, with a total harmonic distortion of less than 3%.
How to monitor the converter's operation?
The device has an LED display to check its operating status. A warning also signals a low battery level.
Warranty: 2 years
15919
