Reinforcement stays for wind turbine mast – Stainless steel cable with sheath 20 m × 3 mm with M4 turnbuckles

A complement to the guying of your installation

• This PVC-sheathed stainless steel cable of 20 meters can be considered for additional reinforcement connections on a wind turbine mast, after mechanical validation of the cable, accessories, and assembly.
• The use remains strictly complementary: it does not replace the main stays, fixings, or anchors necessary for maintaining the mast.
• The available length allows for preparing the sections corresponding to the chosen assembly. The 20 meters represent the total cable length, to be distributed considering the distances between attachments and the reserves needed for terminations.

A stranded construction with tension adjustment

• The cable combines a 7 × 7 stainless steel construction with a PVC outer coating.
• The M4 turnbuckles allow for tension adjustment of the connections, within the limits defined for the validated installation.
• The number and length of the reinforcements must be determined according to the mast configuration and available anchor points, without assuming universal compatibility.

Technical specifications

• Cable material: stainless steel.
• Coating: PVC sheath.
• Construction: 7 × 7 stranded cable.
• Total length: 20 m.
• Stated diameter: 3 mm.
• Turnbuckles: M4.

Usage and safety conditions

• Use as a mast reinforcement requires prior validation by a competent structural professional, based on the documented mechanical capacities of the cable, terminations, turnbuckles, and anchors.
• In the absence of documented allowable load, no safety retention function or mast fall protection can be guaranteed.
• Do not use this assembly to compensate for a damaged mast, defective fastening, or insufficient primary guying.
• After validation and installation, regularly check the condition of the cable, the maintenance of the terminations, the tension, and the anchors, especially after a strong wind episode.

15901 - 060920261546