Set of 3 inverters 3x1000W for 48V wind turbines in self-consumption Three-phase 380V/400V

These 3 inverters of 1000W each will allow you to inject the energy generated by one or more 48V wind turbines directly into your 380V-400V three-phase domestic network. Thus, you can reduce your electricity bill with a maximum installation power of 3000W, i.e., (3x1000w).

Advantages:

• Excellent value for money
• Digital production indicator
• Universal compatibility: Suitable for any type of 48V three-phase wind turbines (maximum 3000W if only one wind turbine is connected)
• Quick and easy installation: Direct connection to an electrical outlet (1 outlet per inverter, i.e., 1 outlet per phase)
• Flexibility: Possibility to connect a single wind turbine to the 3 inverters or one wind turbine per inverter
• Total compatibility: Compatible with all electric meters, including Linky meters (Enedis)
• Ready to use: Connection diagram provided with the set, inverters already pre-programmed and checked before shipment

Operation:

1. Connection : Plug your wind turbine or your 3 wind turbines into the grid inverters.
2. Power supply: Plug each inverter into a standard wall power outlet (16A standard), plan for 3 outlets for the connection (1 outlet per phase).
3. Synchronization: The inverters synchronize with the network voltage and frequency, injecting the current from your wind turbine installation into your home.
4. Energy saving: Your incoming meter slows down and your bill decreases because you primarily consume your own electricity production.

Technical specifications per inverter:

• Nominal power: 900W
• Maximum power: 1000W
• Rated wind turbine voltage: 45-90V AC
• Output voltage: 190-260V
• Type of output alternating current: Pure sine wave
• Output frequency: 46-65 Hz
• MPPT controller efficiency: 94%
• Protection functions: Protection against voltage drop or rise, anti-backflow protection, anti-reverse polarity protection
• Compliance: DIN VDE 1026
• Operating temperature: -20° to +50°
• Dimensions: 434x196x88mm
• Efficiency: >92%
• Weight: 5.5 kg

Included:
3x Dump-load discharge resistors OFFERED
Connection diagram and manual provided

Pack:
Set of 3 inverters for 380V/400V three-phase network

Warranty: 2 years
15705

Reduce your electricity bill with our innovative and easy-to-install solution.

Digital information on the LCD screen:
The inverter control screen will provide you with several necessary information for the proper functioning of your installation.

You will be able to know in real time the power generated, the current, the voltage, the temperature, the voltage sine wave (displayed on a graph), the energy curve injected into the grid during the day, the amount of energy retransmitted, the number of watts injected in real time...

These are wind turbine inverters capable of rectifying and protecting your installation. Indeed, in case of strong wind, these inverters can send the excess production to an overflow resistor. Not only does this protect your installation against overvoltage, but it also slows down the wind turbine. They are compatible with the VDE 126.1.1 standard (grid injection standard). This means it monitors the grid and cuts off the power supply in case of grid failure.