Solar charge controller 12V-24V / 10A MPPT

This charge controller is particularly distinguished by its optimized function of 98% of the input current made available. It is perfectly suitable for the application of 12-24 volt solar modules in connection with batteries.

The MPPT-10A solar charge controller is a high-end product. It incorporates a sophisticated optimal energy conversion algorithm, called MPPT (Maximum Power Point Tracking) designed to maximize energy storage from the photovoltaic generator. The MPPT constantly monitors the operating constants of the PV generator to ensure it remains at its maximum energy conversion point. This technology becomes an advantage in all sunlight conditions, especially in cloudy regions with variable climates where these sunlight conditions change from moment to moment. Solar energy conversion efficiency can be increased by up to 50% compared to a classic controller.

MPPT-10A converts the maximum energy from a PV generator to provide the maximum available current for battery charging. During charging, it controls the battery's charging voltage and current and the discharge current based on the amount of available energy provided by the PV generator and the battery's state of charge. Furthermore, it operates over a wide input voltage range from the PV generator and offers increased flexibility to installers in choosing PV modules and their configuration.

Main features
MPPT type controller driven by a microprocessor
Protection against battery overloads
Protection against deep battery discharges

Technical data
Voltage: 12V or 24v (Automatic detection)
Maximum charge current: 10A
Solar panel efficiency improvement: 10 - 30%
Operating efficiency rate: 95 - 97%
Type: MPPT controller (maximum power point tracking)
Intelligently adapts the solar panel input voltage to work at the maximum power level
MPPT controllers can increase electrical power by up to 30% compared to a standard solar controller
Maintains a constant battery voltage
Prevents battery overcharging
Reverse polarity protection
Overload protection
Short-circuit protection
Maximum continuous charge current: 10A
Battery voltage: 12V/24V
Maximum PV input current: 10A
Maximum PV input voltage: 60V
Maximum PV power: 130W at 12V and 260W at 24V
Optimum conversion efficiency: 97%
Maximum power point tracking efficiency: 97%
Supported lead-acid battery types: Sealed, GEL, Open
4-phase charging mode: Bulk, Absorption, Equalization, Float
Temperature compensation: -5 mV / 2V cell
Communication port: TTL232 / 8pin RJ4
Standby consumption: <10mA (24V)
Operating temperature: -35°C to +55°C
Storage temperature: -35°C to +80°C
Operating humidity: 10% to 90%
IP protection rating IP30
Dimension: 156 x 97 x 68 mm
Weight: 550g

2-year warranty

40145