Controller for 12 V 600 W self-ventilated three-phase wind turbine
SKU: 15288
- Secure payment
- 14-day returns
- Tracked shipping
Intended for 600 W three-phase wind turbines, this regulator operates on a 12 V system and features self-ventilated cooling. It has current limits of 30 A for both charging and discharging, as well as protections against overcurrent charging and battery connection reversal.
- A 12 V configuration for a three-phase wind turbine with a nominal power of 600 W.
- Self-ventilated cooling integrated into the regulator.
- Voltage drops limited to less than 300 mV for charging and 50 mV for discharging.
- Protections dedicated to overcurrent charging and reversed battery connection.
- System voltage: 12 V
- Type of wind turbine: Three-phase
- Nominal wind turbine power: 600 W
- Maximum wind turbine power: 600 W
- Cooling: Self-ventilated
- Maximum charging current: 30 A
- Maximum discharging current: 30 A
- Voltage drop during charge: < 300 mV
- Voltage drop during discharge: < 50 mV
- Tolerated ambient temperature: −30 °C to +80 °C
- Dimensions: 160 × 114 × 60 mm
- Electrical protections: Overcurrent charging and battery connection reversal
Choose a suitable wind turbine configuration
This regulator is intended for an installation with a system voltage of 12 V. It is designed for a three-phase wind turbine, which is a selection criterion for the generator to be connected.
The associated wind turbine's nominal power is 600 W, with a maximum limit also set at 600 W. These two characteristics pertain to the wind turbine and help define the intended configuration.
Distinguish between charging and discharging characteristics
The maximum current is 30 A for charging and 30 A for discharging. These distinct limits allow for separate comparison of the requirements for each circuit in your installation.
The voltage drops are less than 300 mV during charging and 50 mV during discharging. The regulator also includes overcurrent protection for charging and reverse battery connection protection.
Prepare the integration of the regulator
With dimensions of 160 × 114 × 60 mm, the regulator has a defined footprint to prepare its installation. These three measurements allow you to plan the necessary space in your setup.
The regulator's cooling is self-ventilated. The tolerated ambient temperature range extends from −30 °C to +80 °C, a reference to consider when choosing its operating environment.
Compatible with
- Three-phase wind turbine with a nominal power of 600 W for a 12 V system.
Compatibility limits
- The maximum power of the wind turbine is limited to 600 W.
- The current must not exceed 30 A during charging or 30 A during discharging.
Precautions
- Choose an environment where the ambient temperature remains between −30 °C and +80 °C.
For which wind turbine is this regulator intended?
It is intended for a three-phase wind turbine with a nominal power of 600 W, on a 12 V system. The maximum power of the wind turbine is also 600 W.
What are the current limits?
The regulator accepts a maximum current of 30 A during charging. The discharge current limit is also 30 A.
What electrical protections are present?
The regulator has overcurrent protection for charging and reverse battery connection protection.
What footprint should be planned for the installation?
The dimensions of the regulator are 160 × 114 × 60 mm. Its cooling is self-ventilated and its ambient temperature range is from −30 °C to +80 °C.
2-year warranty
15288 - 241020262242
