Regulator for 24 V – 600 W three-phase wind turbine
SKU: 50201
- Secure payment
- 14-day returns
- Tracked shipping
This charge regulator is intended for three-phase wind turbine installations in a 24 V system, with a nominal wind turbine power of 600 W. It combines cooling by ventilation with protections against overcurrent during charging and battery polarity reversal.
- A format dedicated to 24 V installations with a three-phase wind turbine of nominal power 600 W.
- Self-ventilated cooling for thermal management of the regulator.
- Integrated protections against overcurrent during charging and reversed battery connection.
- System voltage: 24 V
- Type of wind turbine: Three-phase
- Nominal wind turbine power: 600 W
- Maximum wind turbine power: 600 W
- Maximum charge current: 25 A
- Maximum discharge current: 25 A
- Voltage drop during charge: < 300 mV
- Voltage drop during discharge: < 50 mV
- Cooling mode: Self-ventilated
- Tolerated ambient temperature: −30 °C to +80 °C
- Regulator dimensions: 160 × 114 × 60 mm
- Electrical protections: Overcurrent during charge and battery polarity reversal
Choose a regulator suitable for the installation
This charge controller is intended for a three-phase wind turbine on a 24 V voltage system. These two characteristics define the type of installation it is intended for.
The nominal power of the associated wind turbine is 600 W, and its maximum allowable power is also 600 W. These limits should be considered when choosing the generator.
Distinct characteristics in charge and discharge
The maximum current is set at 25 A for both charging and discharging. The electrical sizing must therefore take this limit into account in each of these two modes.
Voltage drops differ depending on the operation: they remain below 300 mV during charging and 50 mV during discharging. These values allow distinguishing the two electrical characteristics.
Plan for integration and protections
The casing measures 160 × 114 × 60 mm and features self-ventilated cooling. The tolerated ambient temperature range extends from −30 °C to +80 °C for choosing its installation environment.
The regulator includes protection against overcurrents during charging. It also has dedicated protection for polarity reversal when connecting the battery.
Compatible with
- Three-phase wind turbine installations in a 24 V system, for a wind turbine with a nominal power of 600 W.
Compatibility limits
- The maximum power of the wind turbine is limited to 600 W.
- The charge and discharge currents must not exceed 25 A.
Precautions
- Maintain an ambient temperature between −30 °C and +80 °C.
What type of wind turbine is this regulator intended for?
It is intended for a three-phase wind turbine with a nominal power of 600 W, on an installation with a system voltage of 24 V.
What are the maximum charge and discharge currents?
The maximum charge current is 25 A. The discharge limit is identical, with a maximum current of 25 A.
What electrical protections are integrated?
The controller integrates protection against overcurrents during charging as well as protection against battery polarity reversal.
How is the regulator cooled?
The cooling is self-ventilated, with a fan. The tolerated ambient temperature ranges from −30 °C to +80 °C.
2-year warranty
50201 - 241020262335
